Some unfavorable factors during the detection will affect thedetect accuracy,such as the follwing:
- Environmental factor
Including e.g.,the proximity of other equipment that producestrong magnetic or electronmagnetic fields,moisture,metallibuilding materials,foil-laminated insulation materials orconductive wallpaper or tiles.
- Material and size of the objects.
- Material and condition of the base material.
- Operation mode selection is not accurate.
Therefore, please also observe other information sources(e.g.construction plans) before drilling,sawing or routing into walls,ceilings or floors.
* Less scanning depth for wires while the conductors are not "live".
Technical Data
| Multi-functional wall detector MD120 |
| Maximum probing depth |
| Magnetic metal 120mm |
| Non-Magnetic metal 80mm |
| Charged wire 11O 230volts(in the pass through) 50mm |
| Wood 38mm |
| Switch off instrument with inactivity after 5mins |
| Operation temperature -10C~+ 509C |
| Storage temperature -20C~+70C |
| Battery type 1x9 volts 6L .R61 |
| Operation time about 5 hours |
| Weight conform to EPTA-Procedure 01/2003 270g |
| Protection class IP54 |
Product Features
Care
Keep the measuring tool clean and dry at all times to ensureproper and safe working.
Do not immerse the tool in water or other fluids.
Wipe away debris or contamination with a dry,soft cloth.Do notuse cleaning agents or solvents.
In order not to affect the measuring function,decals/stickers orname plates,especially metal ones,may not be attached in thesensor area 13 on the front or back side of the measuring tool.
Do not remove the contact pads 12 on the back.
Do not open the instrument by yourself Store and transport themeasuring tool only in the supplied soft package.
ln case of repairs,send in the tool packed in its soft package.
Product Tags:
|
|
Pocket Wall Metal Detector , IP54 Wall Pipe Detector With Battery Powerd Images
|
